Welcome to the world of
Daystate

rws500

Daystate Air Ranger an Air Ranger 80 Designed to be a ‘supergun’ amongst sporting air rifles, the Air Ranger and its extra-high power stablemate, the Air Ranger 80, bring a whole new dimension to mechanically-driven PCPs. Now you can shoot well beyond your normal limits.

Re: rws500

Postby airwolf1 » 28 Apr 2014, 21:05

You could ask Milbro to be sure but I think that the Ranger one wont fit, as far as I remember the RWS 500 has a 16mm barrel, the barrels that DS use and then fit their own shroud to are thinner in diameter so the huggett wont fit over a 16mm barrel. :)
Daystate Owners Club new site: www.daystateownersclub.com/forum
User avatar
airwolf1
 
Posts: 458
Joined: 21 Oct 2013, 21:39
Location: Maidenhead, Berkshire

Re: rws500

Postby rws500 » 28 Apr 2014, 22:44

Bugger mine has a sleave over the barrel is that stanard
rws500
 
Posts: 17
Joined: 04 Apr 2014, 00:37
Location: Sunderland Tyne and wear

Re: rws500

Postby airwolf1 » 29 Apr 2014, 18:53

not entirely sure, sounds like the same thing as my X2 has, the sleeve is tight around the barrel not like the current shrouds?, what's the diameter of your barrel?
Daystate Owners Club new site: www.daystateownersclub.com/forum
User avatar
airwolf1
 
Posts: 458
Joined: 21 Oct 2013, 21:39
Location: Maidenhead, Berkshire

Re: rws500

Postby rws500 » 29 Apr 2014, 22:02

When I take sleeve off its 16mm
rws500
 
Posts: 17
Joined: 04 Apr 2014, 00:37
Location: Sunderland Tyne and wear

Re: rws500

Postby rws500 » 11 May 2014, 19:51

9 shot string is this got a reg problem
You do not have the required permissions to view the files attached to this post.
rws500
 
Posts: 17
Joined: 04 Apr 2014, 00:37
Location: Sunderland Tyne and wear

Re: rws500

Postby airwolf1 » 12 May 2014, 10:44

Not necessarily, reg problems would probably show more spread, have you started at the basics like changing the probe O ring? :)
Daystate Owners Club new site: www.daystateownersclub.com/forum
User avatar
airwolf1
 
Posts: 458
Joined: 21 Oct 2013, 21:39
Location: Maidenhead, Berkshire

Re: rws500

Postby Rob » 12 May 2014, 11:01

Try filling the gun to 230 bar then dry firing about ten shots to settle the reg down. Then you can get a better picture of how the reg is performing. That spread does look a bit erratic and would point to the reg. I had an X2R with the same reg and it tested with about 5 fps spread.
If I have an opinion it is because I have researched it or due to life experience. It might not be the same as yours but have you done the above?
User avatar
Rob
 
Posts: 207
Joined: 18 Oct 2013, 08:47
Location: Warringtonish

Re: rws500

Postby rws500 » 12 May 2014, 11:33

If it is the reg what will need to be done to get it more consistent
rws500
 
Posts: 17
Joined: 04 Apr 2014, 00:37
Location: Sunderland Tyne and wear

Re: rws500

Postby rws500 » 12 May 2014, 11:39

Just put new probe oring on all the pellets were weighed aswel
rws500
 
Posts: 17
Joined: 04 Apr 2014, 00:37
Location: Sunderland Tyne and wear

Re: rws500

Postby Rob » 12 May 2014, 12:26

If it's the reg then it is back to Daystate or a local repairer. The reg needs to be repaired by a professional to be 100% safe.
If I have an opinion it is because I have researched it or due to life experience. It might not be the same as yours but have you done the above?
User avatar
Rob
 
Posts: 207
Joined: 18 Oct 2013, 08:47
Location: Warringtonish

PreviousNext

Return to Daystate Air Ranger an Air Ranger 80 Forum

Who is on the Daystate Forum

Users browsing this forum: No registered users and 6 guests



New Daystate posts